FM CPA24-5 | ||
|---|---|---|
 | ||
| Data Sheet Information Compiled by: JEAN-DENIS BACHAND | ||
| New: 19 December 2010 | Drawing by: Jean-Denis Bachand | |
| - | ||
| Engine Builder: Fairbanks Morse | Engine: 2-cycle 38D8 1/8 (12 cylinder OP) | |
| Bore & Stroke | 8" X 10" | |
| RPM (Maximum / Minimum) | 850 / 350 | |
| Main Generator: Westinghouse - WE497A | Horsepower: 2400 | |
| Gear Ratio: 58:21 | Speed: 100 mph | |
| Trucks: one 4-Wheel and one 6-wheel | Configuration: B-C | |
| Traction Motor Blowers: Belt Drive (1) | Model: Westinghouse Y201A | |
| Weight: 286,000 lbs | Traction Motors: Westinghouse - WE370DE2(four) | |
| Tractive Effort (starting) 70,200 lbs @ 25% | Tractive Effort (continuous): 32,000 lbs @ 23.2 mph | |
| Multiple Unit Capability: Yes | Dynamic Braking: Yes | |
| Auxilary Generator: Westinghouse | Alternator: -- | |
| Air Brake: Westinghouse | Model: 24RL | |
| Compressor: Westinghouse | Model: 3C2C | |
| Quantity Built: 22 | Dates: 4/1951 to 9/1951 | |
| - | - | |
| Exterior Dimensions | CPA 24-5 | |
| Total Length | 56'-06.5" | |
| Wheel Diameter | 42" | |
| Truck Wheel Base | 9'-04" & 10'-10" | |
| Height to Top Engine Hood | 15'-00" | |
| Height to Top Cab Hood | 14'-03" | |
| Cab Width | 10'-06.5" | |
| Engine Hood Width | 10'-00" | |
| Center Bolster | 31'-00" | |
| Center Front Truck to Front Pilot | 2'-08" | |
| Center Rear Tucrk to Rear Pilot | 2'-08" | |
| Distance between Truck Centers | 42'-02" | |
| Minimum Turning Radious | 31 degrees | |
| - | - | |
| Fuel Oil: 1200 | Lubricating Oil: 350 | |
| Engine Cooling Water: 400 | Sand Capacity: 20 cu. ft. | |
| Options: VApor Clarkson Boiler (800 lbs/hr) | ||
| - | ||
Reference Sources:
Corrections from Bert Breeley | ||